THE COUNCIL, HAVING REGARD to Article 5 a) of the Convention on the Organisation for Economic Co-operation and Development of 14 December 1960; HAVING REGARD to the Decision-Recommendation of the Council of 1 February 1984 on Transfrontier Movements of Hazardous Waste [C(83)180(Final)]; HAVING REGARD to the Decision-Recommendation of the Council of 5 June 1986 on Exports of Hazardous Wastes from the OECD Area [C(86)64(Final)]; HAVING REGARD to the Resolution of the Council of 20 June 1985 on International Co-operation Concerning Transfrontier Movements of Hazardous Wastes, by which it has been decided to develop an international system for effective control of transfrontier movements of hazardous wastes [C(85)100]; CONVINCED that the development of such a system requires a clear delineation of the wastes to be included in the system; On the proposal of the Environment Committee; I. DECIDES that for the purpose of implementing the above-mentioned Council Acts on the control of transfrontier movements of hazardous wastes involving any Member country: a) The terms "wastes" and "disposal" shall be defined as specified in the Annex, which is an integral part of this Decision; b) Those wastes which are referred to in the above-mentioned Council Acts as Hazardous Wastes shall consist of: i) A core list of wastes as specified in the Annex; and ii) All other wastes which are considered to be or are legally defined as hazardous wastes in the Member country from which these wastes are exported or in the Member country into which these wastes are imported 1 ; c) Member countries shall ensure that the wastes subject to control are classified in the manner specified in the Annex unless these wastes are subject to a transfrontier movement which takes place entirely among the parties to a bilateral or multilateral agreement or arrangement specifying a different method of classification 2 . II. DECIDES that the definitions of Waste and Hazardous Waste contained in the above-mentioned Council Acts are hereby repealed. III. INSTRUCTS the Environment Committee: a) To take account of this Decision in developing the draft international agreement referred to in the Resolution on International Co-operation Concerning Transfrontier Movements of Hazardous Wastes [C(85)100]; b) To report to the Council after an appropriate period not exceeding three years on the implementation of this Decision and to make any proposals it deems necessary for revisions of the Annex in the light of experience gained in its implementation. Annex A series of seven tables serves to define and classify the wastes to be controlled when subject to transfrontier movements. The tables cover the following: Table Y Core List of Wastes to be Controlled Table 1 Reasons why Materials are intended for Disposal Table 2 Disposal Operations Table 3 Generic Types of Potentially Hazardous Wastes Table 4 Constituents of Potentially Hazardous Wastes Table 5 List of Hazardous Characteristics Table 6 Activities which may generate Potentially Hazardous Wastes Definitions For the purposes of this Decision: 1. WASTES are materials other than radioactive materials intended for DISPOSAL, for reasons specified in Table 1. 2. DISPOSAL means any of the operations specified in Table 2. Core List For the purposes of this Decision those wastes which belong to any of the categories described in Table Y shall be controlled unless such wastes do not possess any of the hazardous characteristics listed in Table 5. Classification - International Waste Identification Code Tables 1 to 6 contain code numbers which, taken together, provide a means of complete characterisation of wastes, through an International Waste Identification Code, in order to facilitate their control from generation to disposal. The International Waste Identification Code (IWIC) is obtained as follows: 1. Choose the one or at most two major reason(s) why the wastes are intended for disposal from the list in Table 1. Mark down the reason(s) as Q... plus the code number(s). 2. Indicate the method which has been selected for disposal of the wastes by choosing the one operation from Table 2 which most closely describes the fate intended for the wastes. Mark down as D... or R... plus the code number from Table 2.A or Table 2.B as appropriate. 3. Decide whether the wastes are liquid (L), sludge (P) or solid (S). Powders are considered to be solids. 4. Select from Table 3, the one descriptor which most closely describes the generic form of the wastes. Mark down this descriptor as L..., P... or S... plus the code number. 5. Examine Table 4; either the wastes do or do not contain one or more of the constituents listed. If none, mark down as code "CO". If one, mark down the appropriate code number. If more than one, then the best estimate for the group of no more than three entries in terms of descending hazard should be made. This estimate is meant to be qualitative and based upon the best judgment of the generator of the wastes; physical testing is not implied. 6. Select from Table 5 the one or at most two major potential hazard(s) presented by the wastes. Mark down as H... plus the code number(s). 7. Select from Table 6 the most appropriate single activity generating the wastes. Mark down as A... plus the code number. 8. The order of the International Waste Identification Code is the same as Tables 1 through 6. Main heads of the coding system are set off by double oblique lines. Where more than one entry from a specific Table is applicable, the plus sign (+) is used to separate the codes for each such entry: Q__+__//D,R__//L,P,S__//C__+__+__//H__+__//A__ TABLE Y: CORE LIST OF WASTES TO BE CONTROLLED (revised May 1994) Waste streams : Y1 Clinical wastes from medical care in hospitals, medical centres and clinics Y2 Wastes from the production and preparation of pharmaceutical products Y3 Waste pharmaceuticals, drugs and medicines Y4 Wastes from the production, formulation and use of biocides and phytopharmaceuticals Y5 Wastes from the manufacture, formulation and use of wood preserving chemicals Y6 Wastes from the production, formulation and use of organic solvents Y7 Wastes from heat treatment and tempering operations containing cyanides Y8 Waste mineral oils unfit for their originally intended use Y9 Waste oil/water, hydrocarbon/water mixtures, emulsions Y10 Waste substances and articles containing or contaminated with polychlorinated biphenyls (PCB's) and/or polychlorinated terphenyls (PCT's) and/or polybrominated biphenyls (PBB's) Y11 Waste tarry residues arising from refining, distillation and any pyrolytic treatment Y12 Wastes from production, formulation and use of inks, dyes, pigments, paints, laquers, varnish Y13 Wastes from production, formulation and use of resins, latex, plasticizers, glues/adhesives Y14 Waste chemical substances arising from research and development or teaching activities which are not identified and/or are new and whose effects on man and/or the environment are not known Y15 Wastes of an explosive nature not subject to other legislation Y16 Wastes from production, formulation and use of photographic chemicals and processing materials Y17 Wastes resulting from surface treatment of metals and plastics Y18 Residues arising from industrial waste disposal operations Wastes having as constituents : Y19 Metal carbonyls Y20 Beryllium; beryllium compounds Y21 Hexavalent chromium compounds Y22 Copper compounds Y23 Zinc compounds Y24 Arsenic, arsenic compounds Y25 Selenium; selenium compounds Y26 Cadmium; cadmium compounds Y27 Antimony; antimony compounds Y28 Tellurium; tellurium compounds Y29 Mercury; mercury compounds Y30 Thallium; thallium compounds Y31 Lead; lead compounds Y32 Inorganic fluorine compounds excluding calcium fluoride Y33 Inorganic cyanides Y34 Acidic solutions or acids in solid form Y35 Basic solutions or bases in solid form Y36 Asbestos (dust and fibres) Y37 Organic phosphorous compounds Y38 Organic cyanides Y39 Phenols; phenol compounds including chlorophenols Y40 Ethers Y41 Halogenated organic solvents Y42 Organic solvents excluding halogenated solvents Y43 Any congenor of polychlorinated dibenzo-furan Y44 Any congenor of polychlorinated dibenzo-p-dioxin Y45 Organohalogen compounds other than substances referred to in this Table (e.g. Y39, Y41, Y42, Y43, Y44) TABLE 1: REASONS WHY MATERIALS ARE INTENDED FOR DISPOSAL Q1 Production residues not otherwise specified below Q2 Off-specification products Q3 Products whose date for appropriate use has expired Q4 Materials spilled, lost or having undergone other mishap including any materials, equipment, etc. contaminated as a result of the mishap Q5 Materials contaminated or soiled as a result of planned actions, e.g., residues from cleaning operations, packing materials, containers, etc Q6 Unusable parts, e.g., reject batteries, exhausted catalyst, etc. Q7 Substances which no longer perform satisfactorily, e.g., contaminated acids, contaminated solvents, exhausted tempering salts, etc. Q8 Residues of industrial processes, e.g., slags, still bottoms, etc. Q9 Residues from pollution abatement processes, e.g., scrubber sludges, baghouse dusts, spent filters, etc. Q10 Machining/finishing residues, e.g. lathe turnings, mill scales, etc. Q11 Residues from raw materials processing, e.g., mining residues, oil field slops, etc. Q12 Adulterated materials, e.g. oils contaminated with PCB, etc. Q13 Any materials, substances or products whose use has been banned by law in the country of exportation Q14 Products for which there is no further use, e.g., agriculture, household, office, commercial and shop discards, etc. Q15 Materials, substances or products resulting from remedial actions with respect to contaminated land Q16 Any materials, substances or products which the generator or exporter declares to be wastes and which are not contained in the above categories TABLE 2: DISPOSAL OPERATIONS (Table 2 is divided into two sections) 2.A. Operations which do not lead to the possibility of resource recovery, recycling, reclamation, direct re-use or alternative uses Table 2.A is meant to encompass all such disposal operations which occur in practice, whether or not they are adequate from the point of view of environmental protection . D1 Deposit into or onto land, e.g., landfill, etc. D2 Land treatment, e.g., biodegradation of liquid or sludgy discards in soils, etc. D3 Deep injection, e.g., injection of pumpable discards into wells, salt domes or naturally occurring repositories, etc. D4 Surface impoundment, e.g., placement of liquid or sludge discards into pits, ponds or lagoons, etc. D5 Specially engineered landfill, e.g., placement into lined discrete cells which are capped and isolated from one another and the environment, etc. D6 Release into a water body except seas/oceans D7 Release into seas/oceans including sea-bed insertion D8 Biological treatment not specified elsewhere in this Table which results in final compounds or mixtures which are discarded by means of any of the operations in Table 2.A D9 Physico chemical treatment not specified elsewhere in this Table which results in final compounds or mixtures which are discarded by means of any of the operations in Table 2.A, e.g., evaporation, drying, calcination, etc. D10 Incineration on land D11 Incineration at sea D12 Permanent storage, e.g., emplacement of containers in a mine, etc. D13 Blending or mixing prior to submission to any of the operations in Table 2.A D14 Repackaging prior to submission to any of the operations in Table 2.A D15 Storage pending any of the operations in Table 2.A 2.B. Operations which may lead to resource recovery, recycling, reclamation, direct re-use or alternative uses Table 2.B is meant to encompass all such operations with respect to materials considered to be or legally defined as hazardous wastes and which otherwise would have been destined for operations included in Table 2.A. R1 Use as a fuel (other than in direct incineration) or other means to generate energy R2 Solvent reclamation/regeneration R3 Recycling/reclamation of organic substances which are not used as solvents R4 Recycling/reclamation of metals and metal compounds R5 Recycling/reclamation of other inorganic materials R6 Regeneration of acids or bases R7 Recovery of components used for pollution abatement R8 Recovery of components from catalysts R9 Used oil re-refining or other reuses of previously used oil R10 Land treatment resulting in benefit to agriculture or ecological improvement R11 Uses of residual materials obtained from any of the operations numbered R1 to R10 R12 Exchange of wastes for submission to any of the operations numbered R1 to R11 R13 Accumulation of material intended for any operation in Table 2B TABLE 3: GENERIC TYPES OF POTENTIALLY HAZARDOUS WASTES 3 (THESE MAY BE LIQUID, SLUDGE OR SOLID IN FORM) (revised May 1994) Code Number 4 1 Clinical wastes from medical care in hospitals, medical centres and clinics 2 Wastes from the production and preparation of pharmaceutical products 3 Waste pharmaceuticals, drugs and medicines 4 Wastes from the production, formulation and use of biocides and phytopharmaceuticals 5 Wastes from the manufacture, formulation and use of wood preserving chemicals 6 Wastes from the production, formulation and use of organic solvents 7 Wastes from heat treatment and tempering operations containing cyanides 8 Waste mineral oils unfit for their originally intended use 9 Waste oil/water, hydrocarbon/water mixtures, emulsions 10 Waste substances and articles containing or contaminated with polychlorinated biphenyls (PCBs) and/or polychlorinated terphenyls (PCTs) and/or polybrominated biphenyls (PBBs) 11 Waste tarry residues arising from refining, distillation and any pyrolytic treatment 12 Wastes from production, formulation and use of inks, dyes, pigments, paints, laquers, varnish 13 Wastes from production, formulation and use of resins, latex, plasticizers, glues/adhesives 14 Waste chemical substances arising from research and development or teaching activities which are not identified and/or are new and whose effects on man and/or the environment are not known 15 Wastes of an explosive nature not subject to other legislation 16 Wastes from production, formulation and use of photographic chemicals and processing materials 17 Wastes resulting from surface treatment of metals and plastics 18 Residues arising from industrial waste disposal operations Code Number Materials which contain any of the constituents listed in Table 4 Number consisting of : 19 Animal or vegetable soaps, fats, waxes 20 Non-halogenated organic substances not employed as solvents 21 Inorganic substances without metals 22 Ashes and/or cinders 23 Soil, sand, clay including dredging spoils 24 Non-cyanidic tempering salts 25 Metallic dust, powder 26 Spent catalyst materials 27 Liquids or sludges containing metals 28 Residue from pollution control operations, except (29) and (30) 29 Scrubber sludges 30 Sludges from water purification plants and waste water treatment plants 31 Decarbonization residue 32 Ion-exchange column residue 33 Sewage sludges 34 Wastewaters not otherwise taken into account within Table 3 35 Residue from cleaning of tanks and/or equipment 36 Contaminated equipment 37 Contaminated containers, whose contents included one or more of the constituents listed in Table 4 38 Batteries and other electrical cells 39 Vegetable oils 40 Materials which have been segregated from households and which also exhibit any of the characteristics listed in Table 5 41 Any other wastes which contain any of the constituents listed in Table 4 TABLE 4: CONSTITUENTS OF POTENTIALLY HAZARDOUS WASTES (revised May 1994) Code Number Constituents 5 C1 Beryllium; beryllium compounds [Y20] C2 Vanadium compounds C3 Hexavalent chromium compounds [Y21] C4 Cobalt compounds C5 Nickel compounds C6 Copper compounds [Y22] C7 Zinc compounds [Y23] C8 Arsenic; arsenic compounds [Y24] C9 Selenium; selenium compounds [Y25] C10 Silver compounds C11 Cadmium; cadmium compounds [Y26] C12 Tin compounds C13 Antimony; antimony compounds [Y27] C14 Tellurium; tellurium compounds [Y28] C15 Barium; Barium compounds; excluding barium sulfate C16 Mercury; mercury compounds [Y29] C17 Thallium; thallium compounds [Y30] C18 Lead; lead compounds [Y31] C19 Inorganic sulphides C20 Inorganic fluorine compounds excluding calcium fluoride [Y32] C21 Inorganic cyanides [Y33] C22 The following alkaline or alkaline earth metals: lithium, sodium, potassium, calcium, magnesium in uncombined form C23 Acidic solutions or acids in solid form [Y34] C24 Basic solutions or bases in solid form [Y35] C25 Asbestos (dust and fibres) [Y36] C26 Organic phosphorus compounds [Y37] C27 Metal carbonyls [Y19] C28 Peroxides C29 Chlorates C30 Perchlorates C31 Azides C32 Polychlorinated biphenyls (PCB's) and/or polychlorinated terphenyls (PCT's) and/or polybrominated biphenyls (PBB's) [Y10] C33 Pharmaceutical or veterinary compounds C34 Biocides and phyto-pharmaceutical substances C35 Infectious substances C36 Creosotes C37 Isocyanates, thiocyanates C38 Organic cyanides [Y38] C39 Phenols; phenol compounds including chlorophenols [Y39] C40 Ethers [Y40] C41 Halogenated organic solvents [Y41] C42 Organic solvents, excluding halogenated solvents [Y42] C43 Organohalogen compounds other than substances referred to in this Table [Y45] C44 Aromatic compounds; polycyclic and heterocyclic organic compounds C45 Organic nitrogen compounds; especially aliphatic amines C46 Organic nitrogen compounds; especially aromatic amines C47 Substances of an explosive character [Y15] C48 Sulphur organic compounds C49 Any congenor of polychlorinated dibenzo-furan [Y43] C50 Any congenor of polychlorinated dibenzo-p-dioxin [Y44] C51 Hydrocarbons and their oxygen, nitrogen and/or sulphur compounds not otherwise taken into account in Table 4 TABLE 5: LIST OF HAZARDOUS CHARACTERISTICS (revised May 1994) Code Number 6 Characteristics H1 Explosive : An explosive substance or waste is a solid or liquid substance or waste (or mixture of substances or wastes) which is in itself capable by chemical reaction of producing gas at such a temperature and pressure and at such a speed as to cause damage to the surroundings. H3 Flammable liquids : The word "flammable" has the same meaning as "inflammable". Flammable liquids are liquids, or mixtures of liquids, or liquids containing solids in solution or suspension (for example, paints, varnishes, lacquers, etc. but not including substances or wastes otherwise classified on account of their dangerous characteristics) which give off a flammable vapour at temperatures of not more than 60.50° C, closed-cup test, or not more than 65.60° C, open-cup test. (Since the results of open-cup tests and of closed-cup tests are not strictly comparable and even individual results by the same test are often variable, regulations varying from the above figures to make allowance for such differences would be within the spirit of this definition.) H4.1 Flammable Solids : Solids, or waste solids, other than those classed as explosives, which under conditions encountered in transport are readily combustible, or may cause or contribute to fire through friction. H4.2 Substances or Wastes Liable to Spontaneous Combustion : Substances or wastes which are liable to spontaneous heating under normal conditions encountered in transport, or to heating up in contact with air, and being then liable to catch fire. H4.3 Substances or Wastes which, in Contact with Water Emit Inflammable Gases : Substances or wastes which, by interaction with water, are liable to become spontaneously flammable or to give off flammable gases in dangerous quantities. H5.1 Oxidizing : Substances or wastes which, while in themselves not necessarily combustible, may, generally by yielding oxygen, cause or contribute to, the combustion of other materials. H5.2 Organic Peroxides : Organic substances or wastes which contain the bivalent -0-0- structure are thermally unstable substances which may undergo exothermic self-accelerating decomposition. H6.1 Poisonous (Acute) : Substances or wastes liable either to cause death or serious injury or to harm human health if swallowed or inhaled or by skin contact. H6.2 Infectious substances : Substances or wastes containing viable micro organisms or their toxins which are known or suspected to cause disease in animals or humans. H8 Corrosives : Substances or wastes which, by chemical action, will cause severe damage when in contact with living tissue, or, in case of leakage, will materially damage, or even destroy, other goods or the means of transport; they may also cause other hazards. H10 Liberation of toxic gases in contact with air or water : Substances or wastes which, by interaction with air or water, are liable to give off toxic gases in dangerous quantities. H11 Toxic (Delayed or chronic) : Substances or wastes which, if they are inhaled or ingested or if they penetrate the skin, may involve delayed or chronic effects, including carcinogenicity. H12 Ecotoxic : Substances or wastes which if released present or may present immediate or delayed adverse impacts to the environment by means of bioaccumulation and/or toxic effects upon biotic systems. H13 Capable, by any means, after disposal, of yielding another material, e.g, leachate, which possesses any of the characteristics listed above. The potential hazards posed by certain types of wastes are not yet fully documented; objective tests to define quantitatively these hazards do not exist. Further research is necessary in order to develop means to characterise potential hazards posed to man and/or the environment by these wastes. Standardized tests have been derived with respect to pure substances and materials. Many Member countries have developed tests which can be applied to materials destined for disposal by means of operations listed in Table 2 in order to decide if these materials exhibit any of the characteristics listed in Table 5. TABLE 6: ACTIVITIES WHICH MAY GENERATE POTENTIALLY HAZARDOUS WASTES Agriculture - Farming Industry A100 Agriculture, forest management A101 Cultivation; A102 Animal husbandry; A103 Forest management and forest exploitation (lumbering) A110 Animal and vegetable products from the food sector A111 Meat industry, slaughterhouses, butchery; A112 Dairy industry; A113 Animal and vegetable oil and grease industry; A114 Sugar industry; A115 Others A120 Drink industry A121 Distillation of alcohol and spirits; A122 Brewing of beer; A123 Manufacture of other drinks A130 Manufacture of animal feed Energy A150 Coal industry A151 Production and preparation of coal and coal products; A152 Coking operations A160 Petroleum industr y A161 Extraction of petroleum and natural gas; A162 Petroleum refining; A163 Storage of petroleum and products derived from refining of natural gas A170 Production of electricity A171 Central thermal facilities; A172 Central hydraulic facilities; A173 Central nuclear facilities; A174 Other central electricity facilities A180 Production of water Metallurgy - Mechanical and Electrical Engineering A200 Extraction of metallic ores A210 Ferrous metallurgy A211 Cast iron production (coke oven); A212 Raw steel production (pig iron); A213 Primary steel transformation (rolling mills) A220 Non-ferrous metallurgy A221 Production of alumina; A222 Aluminium metallurgy; A223 Metallurgy of lead and zinc; A224 Metallurgy of precious metals; A225 Metallurgy of other non-ferrous metals; A226 Ferro-alloy industry; A227 Manufacture of electrodes A230 Foundry and metalworking operations A231 Ferrous metal foundries; A232 Non-ferrous metal foundries; A233 Metalworking (not including machining) A240 Mechanical, electrical and electronic construction A241 Machining; A242 Thermal treatment; A243 Surface treatment; A244 Application of paint; A245 Assembly, wiring; A246 Production of batteries and dry cells; A247 Production of electrical wires and cables; (cladding, plating, insulation); A248 Production of electronic components Non-Metallic Minerals - Construction Materials - Ceramics - Glass A260 Mining and quarrying of non-metallic minerals A270 Construction materials, ceramics, glass A271 Production of lime, cement and plaster; A272 Fabrication of ceramic products; A273 Fabrication of products containing asbestos-cement; A274 Production of other construction materials; A275 Glass industry A280 Building, building sites, landscaping Primary Chemical Industry A300 Production of primary chemicals and chemical feedstock A301 Chlorine industry; A351 Fertilizer fabrication; A401 Other manufacturing generators of primary inorganic industrial chemicals; A451 Petroleum and coal industry; A501 Manufacture of basic plastic materials; A551 Other primary organic chemical manufacture; A601 Chemical treatment of fats; fabrication of basic substances for detergents; A651 Fabrication of pharmaceuticals, pesticides, biocides, weed killers; A669 Other manufacture of finished chemicals Industries producing products based upon primary chemicals A700 Production of inks, varnish, paints, glues A701 Production of ink; A702 Production of paint; A703 Production of varnish; A704 Production of glue A710 Fabrication of photographic products A711 Production of photosensitive plates; A712 Fabrication of products for photographic treatments A720 Perfume industry and fabrication of soap and detergent products A721 Fabrication of soap products; A722 Fabrication of detergent products; A723 Fabrication of perfume products A730 Finished rubber and plastic materials A731 Rubber industry; A732 Finished plastic materials A740 Fabrication of products based upon asbestos A750 Production of powders and explosives Textiles and Leathers - Various Wood Based and Furniture Industries A760 Textile and clothing industry A761 Combing and carding of textile fibres; A762 Threading, spinning, weaving; A763 Bleaching, dyeing, printing; A764 Clothing manufacture A770 Leather and hide industry A771 Tanneries, tanning; A772 Fur trade; A773 Manufacture of shoes and other leather products A780 Wood and furniture industry A781 Sawmills, production of wood panels; A782 Manufacture of wood and furniture products A790 Various related industries Paper - Cardboard - Printing A800 Paper and cardboard industry A801 Fabrication of paper pulp; A802 Manufacture of paper and cardboard; A803 Finished goods of paper and cardboard A810 Printing, publishing, photographic laboratories A811 Printing, publishing; A812 Photographic laboratories Commercial Services A820 Laundries, bleaching services, dyers A830 Business enterprise A840 Transport, automobile dealers and repair facilities A841 Automobile dealers and automobile repair facilities; A842 Transportation A850 Hotels, cafés, restaurants General Services A860 Health A861 Health (Hospitals, medical centres, nursing homes, laboratories) A870 Research A871 Research (including research laboratories) A880 Administrative activities, offices Households A890 Households Pollution Control - Waste Disposal A900 Cleaning and maintenance of public areas A910 Urban water treatment facilities A920 Urban waste treatment A930 Treatment of industrial effluents and wastes A931 Incineration; A932 Physico-chemical treatment; A933 Biological treatment; A934 Solidification of wastes; A935 Collection and/or pretreatment of wastes; A936 Landbased disposal above, on or below the surface Regeneration - Recovery A940 Regeneration activities A941 Regeneration of oils; A942 Regeneration of solvents; A943 Regeneration of ion exchange resins A950 Recovery activities 1 In adopting the above Decision, the Council AGREED that when implementing paragraph I.b) ii) of this Decision, Member countries shall not be obliged to enforce laws other than their own. 2 Section I. c) has been suspended since 25 October 2001 [C(2001)208 and C/M(2001)20, item 343]. 3 If liquid, preface “L” is used, if sludge, preface “P” is used, if solid, preface “S” is used. 4 Items 1 to 18 in Table 3 correspond to items Y1 to Y18 in Table Y. 5 The correspondence with Table Y is indicated in brackets. 6 Corresponds to hazard class numbering system included in the United Nations Recommendations on the Transport of Hazardous Goods (Orange Book) for H1 through H9; omissions of H2, H7 and H9 are deliberate.
Organisation de coopération et de développement économiques (OCDE) · Decision
Decision of the Council on Transfrontier Movements of Hazardous Wastes
Voir le document original
Le texte intégral est hébergé par l’organisation qui le publie. lawenc.com indexe les métadonnées et renvoie vers la source officielle.
Texte intégral